Decorative Wall Paneling For Your Home

We all have that one room in our homes where the walls are uneven and bumpy. When company comes over we steer clear of that one room. Every time we are out shopping we are looking through wall covering catalogs or asking the professionals questions. We just haven’t found the solution to our dilemma. That is until today.

The solution that can beautify, easy to maintain and can be applied right over the disastrous wall is decorative wall paneling.

Wall history dates back thousands of years ago. Walls have two main purposes. They act as a support for a structure and to divide or enclose an area. Wall paneling is a decorative treatment of walls which consist of thin sheets of different materials that are framed together.

It adds charm and style and brings luxury and sophistication to your living quarters. Decorative wall paneling is versatile, inexpensive and gives just the right look wherever it is placed. It is welcome in every room of the house. it can also be placed on walls below ground level. There are so many choices you will never be at a loss for inspiration.

Decorative wall paneling is available in a variety of finishes, textures and wood grains with distinctive groove patterns. Consumers have a choice of plywood, fiberboard, hardboard or engineered wood. Decorative varieties come in such styles as bead board, finished panels, wood grain, lionite, wainscot, plank panels and project panels.

Bead board panels add visual interest and are a great selection to use as an accent. Finished panels add richness and textures and are available in a variety of patterns and colors. Wood grain is usually oak or cedar and is pre-finished. Lionite is the toughest of decorative wall panels which is baked on and water resistant and has a melamine finish. Wainscot is pre-cut with a double groove pattern and comes in many wood grains. Plank panels are easy to install and can be hung vertically, horizontal, and diagonal or even in a herringbone pattern. Project panels have a dry erase surface. This is perfect for your home office, garage or basement.

There are eco friendly panels made from bamboo pulp which is one of the world’s most reusable resources. This does not have any chemical filler or additives and trees were not harmed in this process.

There is another wall paneling that uses decorative wrapped fabric that reduces noise and reverberation. You can order custom made panels to meet your specific needs.

Most wall panels are specially coated and sealed to resist moisture and water migration that can cause mold. This decorative solution has become a maintenance free solution for our hectic lives. Install it and enjoy it. It’s just that simple!

Whether you hang this to cover up an existing wall, disguising a not so smooth wall or just to add a modern decorative pattern you will be amazed at the finished product. Another perk is that modern materials have also allowed natural light to come in while preventing harmful UV rays to damage the wall paneling.

In today’s factories, decorative wall panels are pre-cut to the correct dimensions. This minimizes the time of labor and installation. They also have easy to follow instructions and use many tools that you have around the house. This project is easily completed over a weekend.

If you decide to cover your entire room or just one wall my advice to you is get started. Make that impressive statement that we all desire. So at your next dinner party the entire house will be on show.

Wood wall décor is available for your home that will easily transform your space from blah to attractive. Specific pieces are available that will add to your home youthfulness, comfort and attractiveness. Wool decorative wall paneling wood coat racks, shelving and more are available for your home to spruce it up and add life. Here are some tips for your home.

Wood coat racks are a great way to organize your home while cleaning it up. Many entrance ways into homes lack a hallway closet and you may find that your home quickly accumulates a pile of unwanted coats and jackets by the front door. This can be eliminated with an inexpensive and attractive wooden coat rack placed on the wall near the front door. Coats and jackets can be hung in an attractive and neat manner when you have a simple coat rack hung in a convenient location. Keys, purses and coats can all be placed in one easy to find location.

Wood wall panel is an easy and inexpensive way to conceal unattractive walls without having to gut the room and remove the drywall etc. Your home can be attractive with a variety of styles of wood décor decorative wall paneling which is easy attached to the walls in a home. From a bedroom to a living room this wall paneling looks great. Neutral colors as well as specific colors such as pink as available. This is also an easy way to conceal outdated, hard to remove wall paper.

Add style and design to your walls with wood wall décor shelving. Shelving will add style and dimension to your room inexpensively as well. You can use shelving to display collectables, to organize books, or to display art such as pottery. A beautiful home is versatile and have dimension. Spruce up blah walls by adding shelving to your home. You can accent the shelving by handing a picture or painting above it and placing a piece of artwork or photos of loved ones on the shelves.

Wood wall decor will add style and charm to your home inexpensively. Spruce up your home by adding to it some shelving, decorative wall paneling or an organizing coat rack. Your home can be transformed from blah to refreshing in one day with wood wall décor.

Wood decorative wall panel is a traditional method of creating a beautiful interior. Wood decorative wall panel has the characteristic of providing the aura of coziness and comfort to any home. It comes in many types depending on the type of wood used.

Wall panels are becoming an integral part of interior design. These are used for different purposes. Many business establishments use it to hide any electrical wiring and are excellent to decorate the interior of any room.

Portable wall panels are also used as a divider for offices or cubicles. Wall panels are commonly made of wood and sometimes combined with wallpaper or other textured materials to decorate it. For recording studios, a special wall panel is used which is capable of absorbing sound for better acoustics. There are many types of wood decorative wall paneling available in leading hardware. They vary in sizes, color and quality.

Surface Types

The veneer finish wood panels are made of three plies such as the face, back and the core which is in the middle. Pre-finished wood veneers are the most expensive types. Some variants consist of grains to achieve an excellent finish. Less expensive wood panels does not have grains.

Vinyl coated type consists of different wood designs which are laminated into plywood. The designs are usually printed through photo process. This type of wood panel can be cleaned easily but must be treated with care to avoid scratches.

Surface printed is one of the less expensive types of wood panel and commonly used for DIY projects. It consists of wood grain finish by the use of state of the art photography. It is important to use specific cleaning substances for such materials to avoid damage to its finish and color.

Printed paper panel makes use of printed paper with various designs which is then laminated into wood to create a beautiful finish. This the ideal type for a low cost interior.

Backing types are generally available anywhere. They can be made of medium density fiberboard (MDF), hardwood or plywood. If you are short on your budget, you may opt to use hardwood. The expensive variants of wood panel are more tolerable from any moisture because it had been manufactured using various wood treatments.

Grooves are used for wood panel surfaces. This can either be real groves or the painted grooves. Real grooves are the best in quality which can be identified by visually inspecting it. Grooves which are straight and sharp are of high quality. Painted grooves are typically cheaper compared to real grooves.

Wood wall panel is continuously gaining its popularity especially that there are more options which are being introduced by many leading manufacturers. More and more variety of wood panels is designed for Do It Yourself projects where you can easily install your own wood panel in your home.

Make sure that the walls are leveled and dry before installing to avoid moisture from building up and warping it. For concrete walls, it is important to do some sealing by using furring strips as a spacer to help evaporate any builds up of moisture. Even if you are going to use moisture resistant wood panels, you still need to do the first steps.

Wood decorative wall paneling provides you a lot of options in designing your wall. It is also essential to do regular polishing to avoid moisture and help increase the durability of your wood panel. As long as you know how to take care of your wood panel, you will enjoy the benefit of its beauty for many years.

As housing costs slump and more and more people are finishing their basements instead of selling their homes, companies are designing their own basement remodeling wall panels. Unfortunately, many of these companies have products that have been hastily produced, poorly researched, or make misleading claims to the effectiveness of their final product. Before you make a final decision on which basement finishing products you want, ask yourself these five questions:

1. Is this basement wall product water resistant?

A basement water leak at some point isn’t a matter of how, it’s a matter of when. With all the pipes, sinks, and toilets in the house along with the water heater, washing machine, and water storage tank, something is definitely going to leak.

Additionally, rain and ground water can leak through foundation wall cracks in the basement walls or floor as well as through the foundation wall-floor joint.

2. Will my basement wall product resist mold?

Even when your basement is not leaking, water can still come through the porous concrete, stone, or tile foundation walls because of hydrostatic pressure. This moisture will collect behind and under your finished basement wall product. If it has any organic material, this material is going to grow mold. Fiberglass, drywall, wood, and most other building materials used for basement walls have at least some organic material. Mold and dust mites growing on the organic material will release spores and fecal material in the air that will travel throughout the house and are two of the top allergens in a home.

3. How durable will my walls be?

Once you finish your basement, you’re going to want to use it. This means that you may want pictures, shelves, cabinets, a plasma TV, a mirror, a wine rack, or any number of other items mounted on the walls. You’re going to want a strong, reliable wall that can hold up. Additionally, it’s important to have basement walls that can handle daily wear and tear without breaking, scratching, or becoming damaged. A product that washes easily is also important- especially if children and pets will be in the room. A good test to see if your wall is going to be able to handle stains is to draw a pencil line on a sample. If it can be easily removed, then you should be able to wash most stains from the wall. Beware of absorbent wall materials- if it absorbs moisture easily, it will also absorb spills and other liquids.

4. How much insulation does the wall product have?

In Canada and northern United States , a minimum insulation rating of R-13 is being written into local building codes. Whether or not this is required in your area, it’s a good idea to add to the energy efficiency of the home by adding effective insulation to your walls. Hard foam insulation will add to the strength of the wall product overall, and if it also features a hardboard ceramic panel, then you will be able to mount heavy objects on the wall without the need to find a stud. Be sure that if you insulate your wall that it’s completely covered with insulation around the entire perimeter, or your protection will have a hole for heat to pour out.

5. How well can my basement walls keep sound out?

If you plan on making noise in your basement, you’re going to want a wall product that can soundproof your home. Many products do little to keep sound out, and some products even help it travel around the house! Hardboard products tend to reflect sound back when it strikes them, making them a poor sound absorber but a strong sound barrier. Wall panels with soft insulation and a cloth covering absorb sound well and are effective at keeping a room quiet and peaceful.

Basement Wall Comparisons

Wood decorative wall paneling and any type of drywall (even mold-resistant drywall, whose warranty generally runs from 6 months to 3 years) are ineffective materials for basement finishing. Soft insulation wall paneling is a better material to use, with an average of R-11 insulation and strong soundproofing qualities, but it’s unfortunately among the least durable and cleanable of the products, and mold and moisture can still damage it fairly easily. Additionally, its spongelike insulation soaks up moisture very quickly, making it very absorbent for unwanted spills and liquids. Wood decorative wall paneling is more resistant to spills and liquids, but it can swell with water, causing it to warp, buckle, rot, and grow mold. Drywall deals with moisture poorly as well, and when it gets wet, it will generally need to be replaced.

While hard-board insulation wall panels do reflect sound, they have the most advantages of all basement finishing wall products. Basement wall panels like Total Basement Finishing’s EverLast Wall Panels have a 50 year warranty against mold and are durable enough to have a 300+ pound shear rating without studs. A half inch drywall board using nylon wall drills has a 17.5 pound safe shear rating, and most soft insulation wall panels can hold no more than ten pounds! Hard-board wall panels with dense foam insulation can still act as a sound barrier and will not allow sounds to pass through, and they’re much more durable than any other material when it comes to impact damage. A quality dense foam insulation product will easily meet the required R-13 insulation rating, ensuring that the materials will be code compliant for many years to come. Additionally, hard-foam insulation and decorative wall panel that’s properly installed will often have a Class A fireproofing rating, making your home safer than ever!

To summarize: You want a water-resistant, mold-resistant, durable material for your walls. It should have soundproofing properties and at least an R-13 insulation rating. The best way to make sure you’re using a product you can count on is to ask many questions, do a lot of research, and above all, check out the warranty!

There is a particular decorative wall paneling style that works best for different types of decor. You can choose from rustic boards, frame-and-panel designs with or without moulding, and elaborate raised panels. In terms of material, wall paneling can be made from fine hardwoods or inexpensive pine while finishes may be either clear, painted, stained or coated with a wide variety of decorative choices.

There are two types of decorative wall panel sold in the market today: sheets and boards. Sheets are typically 4 feet by 8 feet while boards come in widths ranging from 3 and 10 inches and thickness ranging from 3/8 to 7/8 inch thick. Most boards are usually between 1/2 and 3/4 inch thick.

The first step in decorative wall panel is to place your materials in the room where they will be installed for two to five days. This will help the decorative wall paneling wood adjust to the room’s humidity level and eliminate any shrinkage or expansion problems once the panels are secured to the wall.

The next step is preparing the wall. If the wall has a finished wood-frame, you may be able to attach the board panel through the wallboard or plaster to the wall studs. If it does not have a finished wood frame, you will have to attach furring strips to the studs as a base for securing the panels. Make sure the furring strips are plumb and flat so that the sliding will sit evenly and be flat against the wall.

Before installing the decorative wall panel cut each panel 1/4 inch shorter than the distance from the floor to the ceiling. Apply adhesive then start by positioning the panel on the wall, leaving a 1/4 inch space at the bottom, then driving the four nails partway into the wall. Once done, pull the bottom edge of the panel about six inches from the wall. push a block behind the sheet and wait for the adhesive to take hold. Then remove the block, press the panel firmly into place by using a rubber mallet. You can now drive the top-edge nails all the way in and nail the bottom of the panel. Cover the nail heads and the 1/4 inch gap at the bottom with moulding.

Do the same thing with the rest of the panels until all the walls are done.

Are you living with old decorative wall paneling in your home but cannot afford to replace it? Has it depressed you so much that you have actually considered selling your home? You are not alone. Many people live with that old, ugly wood decorative wall panel but that does not mean you have to. Here are some home improvement tricks you can do to rid of that unattractive decorative wall paneling. Be sure to take your time to learn about the steps involved to ensure you get satisfactory results from your efforts, since it does require some hard work.

A first option is to paint the decorative wall paneling. It is important to remember that you cannot simply paint the wall panel without first preparing the surface. Without proper preparation, your paint will run and you may have yellow streaks. You should use a good cleaner to eliminate the build-up on the wall panel. Then, apply a gloss remover small sections and rub in the direction of the grain. The gloss remover should set for at least thirty minutes, after which time you should apply the primer. Do not remove the gloss remover. The primer should be reapplied if the decorative wall paneling is still showing through after the first coat is dry. Once the primer has dried overnight, add the caulking into the panel grooves and remove excess caulking with a putty knife. Let the caulking dry overnight as well. In the morning, you will be ready to start painting your first coat of regular paint. Let the paint dry according to that brand’s directions and apply a second coat if necessary.

A second option is to apply wallpaper that can be painted. This is a great way to give your home the appearance of a painted wall with the color of your choice. Apply a good degreaser to the decorative wall paneling and let it dry. Once it is dry, you will need to fill in the panel grooves with caulking to give a smooth appearance and rid of any ridges. Use a putty knife to scrape away the excess caulk to provide the paper a smoother, firm surface to stick to. You must then apply a good primer to the surface. Of course, you must size the wallpaper to fit your walls and then hang the wallpaper according to the directions. You will then be ready to paint your wall, but be sure to follow the instructions from the manufacturer for painting wallpaper.

Finally, you can always add a shine to your wall panel by glazing it. As above, you should first clean the decorative wall paneling with a degreaser. You would then paint the decorative wall paneling in a color of your choice and let it dry overnight. Next, mix a satin top color with a glaze according to the instructions to ensure you mix the correct proportions of both. You can the glaze mixture over the painted wall paneling preferably one or two panels at a time. You can then wipe off any excess glaze depending on how much shine you prefer.

Going for a big-scale visual display behind the bed is a very good idea because it focuses attention on the bed. It’s a decorating device many interior decorators use. Here are some bedroom decor tips and ideas for the wall behind the bed.

It’s very trendy to use wallpaper panels to create a tall, virtual ‘bedhead’. You can also be adventurous and use three different wallpaper patterns – either complementary or contrasting – for an eclectic or funky look. The downside of using wallpaper is that it is permanent, so you have to be very sure you like the effect and the pattern before you put it up. In addition, you wouldn’t be able to take it with you if you move out.

A more flexible option to bedroom wall decoration is to hang fabric panels, which can be taken down for cleaning or changed when you get tired of the color scheme. This idea also has the benefit of being a great DIY project you can complete in just one weekend.

Depending on the effect you want, you can hang the panels up individually on a cable wire or a thin chain (from any DIY shops) suspended form two hooks on either side of the bed.

To create the panels, simply fold the top of the fabric over to create an open tunnel and sew, then attach a row of fishing weights or decorative tassels to the opposite end so they will fall straight up. Slip the cable through, hang and voila – a beautifully dressed bed.

Alternatively, look at wall cladding with wood. Large wooden panels can be screwed in place and trimmed with flat molding to make a grid effect. Flush plywood sheets or thin wood veneer at the head of a bed will create a warm sense of enclosure for a sleeping space.

Wood decorative wall paneling can be warming and give the effect of enclosure if dark woods are used; with lighter woods, such as light oak, bleached teak, elm or maple, it tends to be refreshing.

If you’re willing to stretch your imagination, you’ll find many other types of materials to use for your bedroom wall, ranging from metal to leather and even coconut husks.

A decorative molding can be defined as any continuous projection that is used to enhance the look of a wall. In ancient Greece, they were first used to throw water away from the wall. The contours, measurements, and projections of moldings vary greatly.

Frieze

One type of molding – the frieze (or frieze board) – was first used on the Parthenon at the Acropolis. The frieze is considered a part of the Greek architectural style.

The Parthenon was built for the goddess Athena. The frieze moldings that were used were meant to tell the story of her triumph over Poseidon in becoming the patron of the ancient city which is now Athens.

The frieze panels are a series of designed pediments which are filled with the images of Athena’s birth and rise to power. Today, a frieze board is the flat panel just below a crown molding or cornice. Often, low relief is applied to this panel for added decoration.

Today, frieze moldings are most common as a portion of a decorative molding that follows the neoclassical architecture or decorating style.

You need a pretty high ceiling (minimum of 9 feet), and it’s a good idea to paint or stain the frieze and the crown molding the same color. The frieze is a good way to visually bring the ceiling down and make the room appear cozier.

Crown Molding

Crown molding is the most popular type of cornice molding. Crown molding is generally a single-piece of decorative molding, installed at the top of a wall, at an angle to the adjoining ceiling. However, I have seen crown molding assemblies of 5 or more pieces in more elaborate settings.

Crown molding often has a profile that projects out on the ceiling and down the wall, adding a rich appearance to a room. It is often used at the top of cabinets or built-in furniture.

Introducing this type of decorative molding to a relatively simple room provides a historic character that the room would not otherwise have. Crown molding is also used in combination with other moldings to add details to fireplace mantels and shelves. (For what it’s worth, this is probably my favorite architectural feature).

Crown molding is a form of Cornice Molding. The term “cornice” describes molding installed along the top of a wall or above the window. When this treatment is made from multiple pieces of molding, it is called a “build-up cornice.” The other form of cornice molding is the Cove Molding.

Cove Molding

Cove molding is very similar to crown molding, with the same application and function. The difference between the two is in the profile. Cove molding has a concave profile (which bows inward) while crown molding has a convex (outward) profile.

While crown is most at home in traditional settings, Cove moldings are equally comfortable in country, or even contemporary settings. You don’t normally see multi-piece assemblies of cove moldings. You can occasionally see it “beaded” at top and bottom for a little accent.

Entries, formal living rooms, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

Kitchens and other more functional areas of the home might be where you will find the simpler design of the cove molding. Over the years, coves and crowns have become much smaller, but most still bear the shapes and styles of the original Greek and Roman designers.

Chair Rail Molding

A chair rail is a decorative molding that divides a wall horizontally, usually about 32″ to 36″ above the floor. They protect the walls in areas where damage might occur from people getting up out of chairs.

For this reason, the more traditional chair rails will have a nosing in the center, with curved and beveled surfaces that taper back to the wall above and below the nosing.

Today, chair rails remain a common detail in traditional interiors. They serve the decorating effect of unifying the various architectural details of a room, such as door and window trim, and fireplace surrounds.

Chair rail can also be used as a cap for wainscoting or other wood wall paneling. This decorative molding adds a feeling of detail and charm while achieving continuity in a room by unifying the various decorative elements.

Panel Molding

Panel molding, commonly called a picture frame molding, looks like a large empty frame, and is often part of designs on walls of old Colonial and, Georgian, and Early American homes. The placement of this molding should be above the chair rail height and about 10 to 12 inches down from the ceiling.

The size of this type of decorative molding, measuring 1″ to 3″ in width, should be proportionate to the ceiling height of the room. Like the other moldings, panel molding adds a feeling of charm and delicate detail to a room.

Wall framing appears at the Georgian period of American architecture, when plaster began to replace wood panels on the walls. Panel molding also is a good way to divide walls into large, aesthetically pleasing units, without the same expense of full decorative wall panel. application of this versatile molding is to trim openings made by wider planks which are assembled as rails and styles. Often, the centers of these frames are left open. By applying panel moldings around the perimeter of the opening, you create the look of a picture frame.

When this decorative molding is painted in the same color as the surrounding walls, you achieve a sculptural quality to a wall, adding texture and shadows. If moldings are painted in contrasting colors, they can create a striking three dimensional appearance, giving depth and dimension. This type of treatment is popular for staircases and entries.

Baseboard & Base Molding

Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings and other irregularities where the wall meets the floor. Base moldings give the floor line a higher profile, and can be as elaborate or simple as you like.

Whereas it is relatively easy to install chair rail on a level plane, baseboard (like crown) can be tricky if your floors (or ceilings) are not level. For this reason, I recommend getting a professional woodworker for the installation of these moldings.

As one remedy to uneven floors, you can install a “shoe molding” along the bottom front edge to give the baseboard a finished look. Something else you can do with baseboard (as well as with the toe kick of your kitchen cabinets) is incorporate accent lighting.

This isn’t in keeping with the pure traditionalist, but it’s a pretty nifty way to have accent lighting around the perimeter of a room. You couldn’t do this until they created the small LED rope lights of today.

Rope lights come in different lengths and colors, and can be easily installed behind baseboard. Simply make a notch in the back side of the baseboard, at the top, and run the rope lights into the notch.

This is more often used in commercial spaces, but has been added in entries and hallways – especially in contemporary homes.

Flexible Moldings

If you have a curved wall or arch, you can probably have a good craftsman create a curved molding for about 3 times the cost of a straight molding. Or, you can buy a flexible molding for about the same price as the straight one.

These allow you to install moldings onto curved surfaces or arches, without the delay and expense of having them made from wood. The stock profiles (there are hundreds) are identical to the rigid versions and they are compatible as far as paint finish is concerned.

Wood decorative wall panel is one of those unfortunate 1970s leftovers that many people are still living with. Styles have definitely changed, and panels are not considered high home fashion any more. However, many people with these panels on their walls don’t have the budget to fix them. If that sounds like you, there is good news. There are a few things you can do to make your wood decorative wall paneling snazzier; home improvement ideas that don’t have to break the bank.

If your wood decorative wall paneling needs a little work, and you are willing to put in the time, and even may have access to a cnc router, give these ideas a whirl.

Panel Painting

A word of caution, this is easier said than done. Wood wall paneling is very thirsty, and it will drink up the paint you throw on it and creep back through again. To make sure you paint job doesn’t get swallowed up by the panels, you need to prep appropriately. First and foremost, scrub the panel clean. Even if it looks ok, you’ll need to use some kind of degreasing agent. Then, you’ll need to peel that nice glossy sheen off the panel with gloss remover. These products all work differently, so check out the directions on the kind you buy. You may require a few rounds of gloss remover, or you may need to do some spot de-glossing to get it all off. Now, you’ll have to patch up any holes and let the spackle dry as needed.

With all of that done, you’re ready to paint. Two coats should do it – allow adequate drying time between coats.

Is it Paint or Is it Wallpaper?

If you think that your panels will drink up any paint you take near it, you can take care of that problem with wallpaper that you can paint. This is a special kind of wallpaper, so check with the experts at the store. You can go for a wallpaper with a design that you can expand on with paint, or you can for a plain color that you can top with a coat of your favorite paint. You’ll need to prep the decorative wall paneling in much the same way you did for painting before you hang your wallpaper.

Glazed Wall Panels

Buff up your decorative wall paneling by glazing. As always, clean and degrease the walls and then fill in the holes. When done, paint the panels in the color of your choice, however, for your second coat, mix top coat glaze mix in with the paint – the package will tell you how much you’ll need. You can glaze parts of your wall or the whole wall; the choice is yours. If you’ve over done it, mineral spirits will sort things out for you.

Paneling is the process of covering the wall from desired components like wood or stone. Others use plastic for economic reasons.

Paneling makes the original set up of a room more comfortable. This insulates the room from its original walling like solid stone or dull wood. Many people install decorative wall panel for the purpose of decorating.

There are many kinds of wall paneling that varying on the material used:

- Wall decorative wall panel Decorative decorative wall paneling Bamboo decorative wall paneling Stone decorative wall paneling Bead board decorative wall panel Brick decorative wall paneling Knotty pine decorative wall paneling Vinyl wood decorative wall panel Real wood decorative wall paneling Painting decorative wall paneling Tongue and groove wall paneling Wallpapering over decorative wall paneling. are also two styles of decorative wall paneling. decorative wall paneling style – This is the oldest and the finest style. This is made of premium wood veneers with natural variation.
o Ceiling decorative wall paneling – This style has a different appearance because it is made of various materials. It is commonly used in interior decoration. It provides decorative finishing, and sound and heat insulation. This is the style of decorative wall paneling that can be cleaned easily. It can be made of wood, metal, fiber or any other materials.

Stone wall paneling is suitable for both indoors and outdoors. It is perfect in creating wonderful water features. Stone panels have varied textures, with four basic colors – charcoal, white quartz, ochre, and ivory.

Natural stones create a sense of timeless elegance. This type of panel is very durable.

Stone decorative wall panel comes in modular form. They can be installed easily and fast on sound surfaces. It is beautifully- textured and it can produce an innovative design for any space. It can however give a hint of roughness. Stone panels can be a stunning wall feature because of its aesthetical pleasing lines. Such panels are suited around pools and spas, inside your kitchen, in bathrooms, offices, in your small shop, bar or in café. It is best for cladding a brick or in block concrete wall.

Stone wall paneling provide not only great looks but also the functionality of real masonry stonework. The products used in stone decorative wall paneling have the following qualities:

- It is more durable.

- It is cost effective.

- It is fire and ultra- violet resistant.

- It is waterproof.

- It is insulating.

- It is maintenance free.

All of these can be done with stone wall panel. Although a bit expensive, stone panels last for a long time.